StoredProcedureQuery

All Superinterfaces:

Query
```
public interface StoredProcedureQuery
extends Query
```
Interface used to control stored procedure query execution.
Stored procedure query execution may be controlled in accordance with the following:
- The setParameter methods are used to set the values of all required IN and INOUT parameters. It is not required to set the values of stored procedure parameters for which default values have been defined by the stored procedure.
- When getResultList and getSingleResult are called on a StoredProcedureQuery object, the provider will call execute on an unexecuted stored procedure query before processing getResultList or getSingleResult.
- When executeUpdate is called on a StoredProcedureQuery object, the provider will call execute on an unexecuted stored procedure query followed by getUpdateCount. The results of executeUpdate will be those of getUpdateCount.
- The execute method supports both the simple case where scalar results are passed back only via INOUT and OUT parameters as well as the most general case (multiple result sets and/or update counts, possibly also in combination with output parameter values).
- The execute method returns true if the first result is a result set, and false if it is an update count or there are no results other than through INOUT and OUT parameters, if any.
- If the execute method returns true, the pending result set can be obtained by calling getResultList or getSingleResult.
- The hasMoreResults method can then be used to test for further results.
- If execute or hasMoreResults returns false, the getUpdateCount method can be called to obtain the pending result if it is an update count. The getUpdateCount method will return either the update count (zero or greater) or -1 if there is no update count (i.e., either the next result is a result set or there is no next update count).
- For portability, results that correspond to JDBC result sets and update counts need to be processed before the values of any INOUT or OUT parameters are extracted.
- After results returned through getResultList and getUpdateCount have been exhausted, results returned through INOUT and OUT parameters can be retrieved.
- The getOutputParameterValue methods are used to retrieve the values passed back from the procedure through INOUT and OUT parameters.
- When using REF_CURSOR parameters for result sets the update counts should be exhausted before calling getResultList to retrieve the result set. Alternatively, the REF_CURSOR result set can be retrieved through getOutputParameterValue. Result set mappings will be applied to results corresponding to REF_CURSOR parameters in the order the REF_CURSOR parameters were registered with the query.
- In the simplest case, where results are returned only via INOUT and OUT parameters, execute can be followed immediately by calls to getOutputParameterValue.
Since:

2.1

See Also:

Query, Parameter

Method Summary

All Methods Instance Methods Abstract Methods
Modifier and Type	Method and Description
`boolean`	`execute()` Return true if the first result corresponds to a result set, and false if it is an update count or if there are no results other than through INOUT and OUT parameters, if any.
`int`	`executeUpdate()` Return the update count of -1 if there is no pending result or if the first result is not an update count.
`java.lang.Object`	`getOutputParameterValue(int position)` Retrieve a value passed back from the procedure through an INOUT or OUT parameter.
`java.lang.Object`	`getOutputParameterValue(java.lang.String parameterName)` Retrieve a value passed back from the procedure through an INOUT or OUT parameter.
`java.util.List`	`getResultList()` Retrieve the list of results from the next result set.
`java.lang.Object`	`getSingleResult()` Retrieve a single result from the next result set.
`int`	`getUpdateCount()` Return the update count or -1 if there is no pending result or if the next result is not an update count.
`boolean`	`hasMoreResults()` Return true if the next result corresponds to a result set, and false if it is an update count or if there are no results other than through INOUT and OUT parameters, if any.
`StoredProcedureQuery`	`registerStoredProcedureParameter(int position, java.lang.Class type, ParameterMode mode)` Register a positional parameter.
`StoredProcedureQuery`	`registerStoredProcedureParameter(java.lang.String parameterName, java.lang.Class type, ParameterMode mode)` Register a named parameter.
`StoredProcedureQuery`	`setFlushMode(FlushModeType flushMode)` Set the flush mode type to be used for the query execution.
`StoredProcedureQuery`	`setHint(java.lang.String hintName, java.lang.Object value)` Set a query property or hint.
`StoredProcedureQuery`	`setParameter(int position, java.util.Calendar value, TemporalType temporalType)` Bind an instance of `java.util.Calendar` to a positional parameter.
`StoredProcedureQuery`	`setParameter(int position, java.util.Date value, TemporalType temporalType)` Bind an instance of `java.util.Date` to a positional parameter.
`StoredProcedureQuery`	`setParameter(int position, java.lang.Object value)` Bind an argument value to a positional parameter.
`StoredProcedureQuery`	`setParameter(Parameter<java.util.Calendar> param, java.util.Calendar value, TemporalType temporalType)` Bind an instance of `java.util.Calendar` to a `Parameter` object.
`StoredProcedureQuery`	`setParameter(Parameter<java.util.Date> param, java.util.Date value, TemporalType temporalType)` Bind an instance of `java.util.Date` to a `Parameter` object.
`<T> StoredProcedureQuery`	`setParameter(Parameter<T> param, T value)` Bind the value of a `Parameter` object.
`StoredProcedureQuery`	`setParameter(java.lang.String name, java.util.Calendar value, TemporalType temporalType)` Bind an instance of `java.util.Calendar` to a named parameter.
`StoredProcedureQuery`	`setParameter(java.lang.String name, java.util.Date value, TemporalType temporalType)` Bind an instance of `java.util.Date` to a named parameter.
`StoredProcedureQuery`	`setParameter(java.lang.String name, java.lang.Object value)` Bind an argument value to a named parameter.

Methods inherited from interface jakarta.persistence.Query
getFirstResult, getFlushMode, getHints, getLockMode, getMaxResults, getParameter, getParameter, getParameter, getParameter, getParameters, getParameterValue, getParameterValue, getParameterValue, getResultStream, isBound, setFirstResult, setLockMode, setMaxResults, unwrap

- Method Detail
  - setHint
```
StoredProcedureQuery setHint(java.lang.String hintName,
                             java.lang.Object value)
```
    Set a query property or hint. The hints elements may be used to specify query properties and hints. Properties defined by this specification must be observed by the provider. Vendor-specific hints that are not recognized by a provider must be silently ignored. Portable applications should not rely on the standard timeout hint. Depending on the database in use, this hint may or may not be observed.
    
    Specified by:
    
    setHint in interface Query
    
    Parameters:
    
    hintName - name of the property or hint
    
    value - value for the property or hint
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the second argument is not valid for the implementation
  - setParameter
```
<T> StoredProcedureQuery setParameter(Parameter<T> param,
                                      T value)
```
    Bind the value of a Parameter object.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    param - parameter object
    
    value - parameter value
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter does not correspond to a parameter of the query
  - setParameter
```
StoredProcedureQuery setParameter(Parameter<java.util.Calendar> param,
                                  java.util.Calendar value,
                                  TemporalType temporalType)
```
    Bind an instance of java.util.Calendar to a Parameter object.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    param - parameter object
    
    value - parameter value
    
    temporalType - temporal type
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter does not correspond to a parameter of the query
  - setParameter
```
StoredProcedureQuery setParameter(Parameter<java.util.Date> param,
                                  java.util.Date value,
                                  TemporalType temporalType)
```
    Bind an instance of java.util.Date to a Parameter object.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    param - parameter object
    
    value - parameter value
    
    temporalType - temporal type
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter does not correspond to a parameter of the query
  - setParameter
```
StoredProcedureQuery setParameter(java.lang.String name,
                                  java.lang.Object value)
```
    Bind an argument value to a named parameter.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    name - parameter name
    
    value - parameter value
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or if the argument is of incorrect type
  - setParameter
```
StoredProcedureQuery setParameter(java.lang.String name,
                                  java.util.Calendar value,
                                  TemporalType temporalType)
```
    Bind an instance of java.util.Calendar to a named parameter.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    name - parameter name
    
    value - parameter value
    
    temporalType - temporal type
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or if the value argument is of incorrect type
  - setParameter
```
StoredProcedureQuery setParameter(java.lang.String name,
                                  java.util.Date value,
                                  TemporalType temporalType)
```
    Bind an instance of java.util.Date to a named parameter.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    name - parameter name
    
    value - parameter value
    
    temporalType - temporal type
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or if the value argument is of incorrect type
  - setParameter
```
StoredProcedureQuery setParameter(int position,
                                  java.lang.Object value)
```
    Bind an argument value to a positional parameter.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    position - position
    
    value - parameter value
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if position does not correspond to a positional parameter of the query or if the argument is of incorrect type
  - setParameter
```
StoredProcedureQuery setParameter(int position,
                                  java.util.Calendar value,
                                  TemporalType temporalType)
```
    Bind an instance of java.util.Calendar to a positional parameter.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    position - position
    
    value - parameter value
    
    temporalType - temporal type
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if position does not correspond to a positional parameter of the query or if the value argument is of incorrect type
  - setParameter
```
StoredProcedureQuery setParameter(int position,
                                  java.util.Date value,
                                  TemporalType temporalType)
```
    Bind an instance of java.util.Date to a positional parameter.
    
    Specified by:
    
    setParameter in interface Query
    
    Parameters:
    
    position - position
    
    value - parameter value
    
    temporalType - temporal type
    
    Returns:
    
    the same query instance
    
    Throws:
    
    java.lang.IllegalArgumentException - if position does not correspond to a positional parameter of the query or if the value argument is of incorrect type
  - setFlushMode
```
StoredProcedureQuery setFlushMode(FlushModeType flushMode)
```
    Set the flush mode type to be used for the query execution. The flush mode type applies to the query regardless of the flush mode type in use for the entity manager.
    
    Specified by:
    
    setFlushMode in interface Query
    
    Parameters:
    
    flushMode - flush mode
    
    Returns:
    
    the same query instance
  - registerStoredProcedureParameter
```
StoredProcedureQuery registerStoredProcedureParameter(int position,
                                                      java.lang.Class type,
                                                      ParameterMode mode)
```
    Register a positional parameter. All parameters must be registered.
    
    Parameters:
    
    position - parameter position
    
    type - type of the parameter
    
    mode - parameter mode
    
    Returns:
    
    the same query instance
  - registerStoredProcedureParameter
```
StoredProcedureQuery registerStoredProcedureParameter(java.lang.String parameterName,
                                                      java.lang.Class type,
                                                      ParameterMode mode)
```
    Register a named parameter.
    
    Parameters:
    
    parameterName - name of the parameter as registered or specified in metadata
    
    type - type of the parameter
    
    mode - parameter mode
    
    Returns:
    
    the same query instance
  - getOutputParameterValue
```
java.lang.Object getOutputParameterValue(int position)
```
    Retrieve a value passed back from the procedure through an INOUT or OUT parameter. For portability, all results corresponding to result sets and update counts must be retrieved before the values of output parameters.
    
    Parameters:
    
    position - parameter position
    
    Returns:
    
    the result that is passed back through the parameter
    
    Throws:
    
    java.lang.IllegalArgumentException - if the position does not correspond to a parameter of the query or is not an INOUT or OUT parameter
  - getOutputParameterValue
```
java.lang.Object getOutputParameterValue(java.lang.String parameterName)
```
    Retrieve a value passed back from the procedure through an INOUT or OUT parameter. For portability, all results corresponding to result sets and update counts must be retrieved before the values of output parameters.
    
    Parameters:
    
    parameterName - name of the parameter as registered or specified in metadata
    
    Returns:
    
    the result that is passed back through the parameter
    
    Throws:
    
    java.lang.IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or is not an INOUT or OUT parameter
  - execute
```
boolean execute()
```
    Return true if the first result corresponds to a result set, and false if it is an update count or if there are no results other than through INOUT and OUT parameters, if any.
    
    Returns:
    
    true if first result corresponds to result set
    
    Throws:
    
    QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
    
    PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back
  - executeUpdate
```
int executeUpdate()
```
    Return the update count of -1 if there is no pending result or if the first result is not an update count. The provider will call execute on the query if needed.
    
    Specified by:
    
    executeUpdate in interface Query
    
    Returns:
    
    the update count or -1 if there is no pending result or if the next result is not an update count.
    
    Throws:
    
    TransactionRequiredException - if there is no transaction or the persistence context has not been joined to the transaction
    
    QueryTimeoutException - if the statement execution exceeds the query timeout value set and only the statement is rolled back
    
    PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back
  - getResultList
```
java.util.List getResultList()
```
    Retrieve the list of results from the next result set. The provider will call execute on the query if needed. A REF_CURSOR result set, if any, will be retrieved in the order the REF_CURSOR parameter was registered with the query.
    
    Specified by:
    
    getResultList in interface Query
    
    Returns:
    
    a list of the results or null is the next item is not a result set
    
    Throws:
    
    QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
    
    PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back
  - getSingleResult
```
java.lang.Object getSingleResult()
```
    Retrieve a single result from the next result set. The provider will call execute on the query if needed. A REF_CURSOR result set, if any, will be retrieved in the order the REF_CURSOR parameter was registered with the query.
    
    Specified by:
    
    getSingleResult in interface Query
    
    Returns:
    
    the result or null if the next item is not a result set
    
    Throws:
    
    NoResultException - if there is no result in the next result set
    
    NonUniqueResultException - if more than one result
    
    QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
    
    PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back
  - hasMoreResults
```
boolean hasMoreResults()
```
    Return true if the next result corresponds to a result set, and false if it is an update count or if there are no results other than through INOUT and OUT parameters, if any.
    
    Returns:
    
    true if next result corresponds to result set
    
    Throws:
    
    QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
    
    PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back
  - getUpdateCount
```
int getUpdateCount()
```
    Return the update count or -1 if there is no pending result or if the next result is not an update count.
    
    Returns:
    
    update count or -1 if there is no pending result or if the next result is not an update count
    
    Throws:
    
    QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
    
    PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

Interface StoredProcedureQuery

Method Summary

Methods inherited from interface jakarta.persistence.Query

Method Detail

setHint

setParameter

setParameter

setParameter

setParameter

setParameter

setParameter

setParameter

setParameter

setParameter

setFlushMode

registerStoredProcedureParameter

registerStoredProcedureParameter

getOutputParameterValue

getOutputParameterValue

execute

executeUpdate

getResultList

getSingleResult

hasMoreResults

getUpdateCount